ASTROJET 3800 DRIVER

Allow enough room to place the Feeder on the same work surface. In normal operation, the printing is read from the operator side of the Printer. Head 1 can be combined with Heads 2, 3 and 4 to print 2″ of information. When you have completed the steps above, the layout should look like the one below. The best advice we can offer is to make sure that the system is setup properly, plugged in, that it has an adequate supply of ink before attempting to troubleshoot any problem. Page of 34 Go. No provisions are made to install the larger Cartridges.

Uploader: Fenrikinos
Date Added: 11 August 2011
File Size: 63.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49435
Price: Free* [*Free Regsitration Required]

Table of Contents Add to my manuals Add. White streaks will then show up in the printed text or graphic. The windows for Windows and XP will be on the right. The next time that the Printer is used, the Printhead may have to be cleaned and purged. Section 2 – Installing The Printer Place the Printer with the Feeder on a sturdy worktable or cabinet at least 12 inches from any walls. In the P, Heads 5 and 6 can be combined with Heads 7 and 8 to print another 2″ of information.

  ATI RADEON XPRESS 1250 VGA DRIVER DOWNLOAD

Summary of Contents for AstroJet P? The Printer must be cleaned regularly of accumulated paper dust and ink.

Also turns the Printer off line to access the Menu Mode. Don’t have an account? Control Panel Printheads to compensate for different media thickness. This will give the first piece printed more time to dry before the next piece is printed.

It is sometimes necessary to turn the printing direction degrees from the normal direction. Place the Feeder on a flat level surface.

When you have completed the steps above, the layout should look like the one below. Head 1 can be combined with Heads 2, 3 and 4 to print 2″ of information. In order to obtain better print quality, these ink plugs need to be forced out or purged.

AstroJet 3600P? 3800P Operator’s Manual

The Inkjet Cartridge The Inkjet Cartridges must be replaced when out of ink, when print quality 38000 poor, or when purging and cleaning have not helped the image quality.

Use one or two Center Straps [2] to help hold the media down. Comments to this Manuals Your Name. By pressing ‘print’ button you will print only current page.

Enter text from picture: The has six Printheads and the has eight Printheads. Place the Printer with the Feeder on a sturdy worktable or cabinet at astrojeh 12 inches from any walls.

  FUJICOM MP3 DRIVER DOWNLOAD

Jams In The Printer Nozzles. Store the Cartridge in the Docking Station.

AstroJet Spot Color Yellow Ink Cartridge – Pages

Related Manuals for AstroJet P? These are initial settings. Then lock the Separators in position using the Separator Locking Lever. The best advice we can offer is to make sure that the system is setup properly, plugged in, that it has astrrojet adequate supply of ink before attempting to troubleshoot any problem. In normal operation, the printing is read from the operator side of the Printer. Place the media under astrojer Separators and release them so that they rest on the media.

Got it, continue to print. Printing From Microsoft Word When you have completed the steps above, the atrojet should look like the one below. Printheads to compensate for different media thickness. Depending on the types of media that are run, paper dust may accumulate within the Printer and on the Transport.

ASTROJET 3800 DRIVER

Place the media under the Separators and release them so that they rest on the media. The windows for Windows and XP will be on the right. Enter text from picture: The Printer must be cleaned regularly of accumulated paper dust and ink. Install standard Cartridges as follows: Don’t have an account?

Uploader: Brashura
Date Added: 9 March 2009
File Size: 15.98 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 98673
Price: Free* [*Free Regsitration Required]

AstroJet AstroJet 3800 Inkjet Cartridges – Q2344A (No. 1918) Cartridges

Printheads to compensate for different media thickness. Head 1 can be combined with Heads 2, 3 and 4 to print 2″ of information.

No provisions are 300 to install the larger Cartridges. When you have completed the steps above, the layout should look like the one below. Place the Printer with the Feeder on a sturdy worktable or cabinet at least 12 inches from any walls.

Don’t show me this message again.

Store the Cartridge in the Docking Station. By pressing ‘print’ button you will print only current page. It is sometimes necessary to turn the printing direction degrees from the normal direction.

  ATI RADEON XPRESS 1250 VGA DRIVER DOWNLOAD

AstroJet 3600P? 3800P Operator’s Manual

Extra lines; losing data Improper output address Wrong Interface settings Check software or database on information out of order, miss- Static electricity Close AstroJet Control Panel feeding, etc. In normal operation, the printing is read from the operator side of the Printer.

Related Manuals for AstroJet P? Use one or two Center Straps [2] to help hold the media down. Got it, continue to print. Enter text from picture: The Printer must be cleaned regularly of accumulated paper dust and ink. This will give the first piece printed more time to dry before the next piece is printed. We have tried to make them as complete as possible. The has six Printheads and the has eight Printheads.

Printing From Microsoft Word When you have completed the steps above, the layout should look like the one below. The Inkjet Cartridge The Inkjet Cartridges astgojet be replaced when out of ink, when print quality is poor, or when purging and cleaning have not helped the image quality.

The Feeder can be permanently mounted by removing the four rubber feet, aligning the Feeder astfojet the Support Stand, then reinstalling the feet to hold the Feeder in place. Depending on the types of media that are run, paper dust may accumulate within the Printer and on the Transport.

  CN5614CH XP DRIVER DOWNLOAD

Place the Feeder on a flat level surface.

AJP/AJP | Astro Machine Corp.

These are initial settings. Place the media under the Separators and release them so that they rest on the media. Also turns the Printer off line to access the Menu Mode. In order to obtain better print quality, these ink plugs need to be forced out or purged. Install standard Cartridges as follows: Then lock 300 Separators in position using the Separator Locking Lever. The adjustment range is in 0. Page of 34 Go. Don’t have an astrojef

Control Panel Printheads to compensate for different media thickness. Summary of Contents for AstroJet P?